In setting up Azure AD Connect, the following warnings occur. Users are not being imported into Azure, and I'm not finding where the problem is. Azure AD Connectis setup on a DC running Windows Server 2012 R2Core. One week later, and there are still no objects. Right now, I'm only syncing an OU that has 10 users/groups in it. So it shouldn't take this long.
Event ID: 6012
Source: ADSync
Message: The management agent "domain-name.onmicrosoft.com - AAD" failed on run profile "Full Import" because the management agent did not import any objects during the run step.
There is one other warning message - event ID 905.
Log Name: Application
Source: Directory Synchronization
Date: 3/25/2015 5:02:14 PM
Event ID: 905
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Description:
The description for Event ID 905 from source Directory Synchronization cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Object type 'device' is not supported. Skipping object 'CN={4465766963655F30393835383238372D383366362D343538622D393633642D653165666531616638636664}'.
I'll add that overnight, I also received a new warning for event 6126. It suggested running a full sync, which I did by running "DirectorySyncClientCmd.exe INITIAL". But then event 6026 returned.
Log Name: Application
Source: ADSync
Date: 3/26/2015 8:00:02 AM
Event ID: 6126
Task Category: Management Agent Run Profile
Level: Warning
Keywords: Classic
User: N/A
Description:
The management agent "domain-name.onmicrosoft.com - AAD" completed run profile "Delta Import" with a delta import or delta synchronization step type. The rules configuration has changed since the last full import or full synchronization.
User Action
To ensure the updated rules are applied to all objects, a run with step type of full import and full synchronization should be completed.
Event ID: 6012
Source: ADSync
Message: The management agent "domain-name.onmicrosoft.com - AAD" failed on run profile "Full Import" because the management agent did not import any objects during the run step.
There is one other warning message - event ID 905.
Log Name: Application
Source: Directory Synchronization
Date: 3/25/2015 5:02:14 PM
Event ID: 905
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Description:
The description for Event ID 905 from source Directory Synchronization cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Object type 'device' is not supported. Skipping object 'CN={4465766963655F30393835383238372D383366362D343538622D393633642D653165666531616638636664}'.
I'll add that overnight, I also received a new warning for event 6126. It suggested running a full sync, which I did by running "DirectorySyncClientCmd.exe INITIAL". But then event 6026 returned.
Log Name: Application
Source: ADSync
Date: 3/26/2015 8:00:02 AM
Event ID: 6126
Task Category: Management Agent Run Profile
Level: Warning
Keywords: Classic
User: N/A
Description:
The management agent "domain-name.onmicrosoft.com - AAD" completed run profile "Delta Import" with a delta import or delta synchronization step type. The rules configuration has changed since the last full import or full synchronization.
User Action
To ensure the updated rules are applied to all objects, a run with step type of full import and full synchronization should be completed.
Nick Moseley | http://t3chn1ck.wordpress.com